基于Ansys的渗流自由面计算方法
摘要:对渗流自由面计算的单元传导矩阵调整法进行了改进。在局部坐标系下,将单元离散为一系列面元(三维为体元),根据面元或体元形心处的压力水头值来确定面元或体元的权系数,然后按加权平均确定单元的等效渗透系数,该方法既可以避免复合单元中自由面上下面积或体积的计算,面元或体元的离散密度也可以任意选择,简化了计算程序。通过预设的收敛参数来控制迭代过程,可避免相邻两次计算的渗透系数变化太大而难于收敛。以Ansys为开发平台,用APDL语言编写了相应的计算程序,扩展了Ansys的计算功能,为渗流自由面计算提供了新途径。算例表明:该方法的收敛性较好、计算精度较高,能满足工程需要。
Abstract:An improved element conductivity matrix regulative method for seepage analysis with free surface is proposed. The elements are discretized to a series of panels (cells for 3D) in local coordinate system, the weight coefficient of panel or cell is determined according to the pressure head in the center of it, then the equivalent permeability coefficient of element is obtained by weighted averaging, this method can avoid area or volume calculation near the free surface and the mesh density of panel or cell is optional, the program is simplified. The iterative process is controlled by setting convergence parameter in advance, avoiding convergent difficulty due to the enormous change of permeability coefficient between two successive iterations. Seepage analysis program is coded with APDL language of Ansys, the function of Ansys is extended and a newly approach for seepage analysis with free surface is presented. The numerical examples show that this improved method can meet engineering requirement for its better convergence and higher accuracy.
中文标题：
基于Ansys的渗流自由面计算方法
Method for Seepage Analysis With Free Surface Based on Ansys
作者：
陈江
Chen Jiang
作者简介:陈江,1982年生,男,汉族,四川成都人,博士研究生,研究方向为工程检测及计算机方法。E-mail:chxifei@126.com
通讯地址：
四川大学水利水电学院, 四川成都 610065
CollegeofHydraulic&HydroelectricEngineeringsSichuanUniversity,ChengduSichuan610065China
中图分类号:TU991.32
出版物：岩土工程技术
收稿日期:2008-06-20
网络出版日期:2021-07-07
关键词:渗流,自由面,复合单元,等效渗透系数,迭代
Key words:seepage,free surface,composite element,equivalent permeability coefficient,iteration
文档包含图片数量：图片(0)张
文档包含表格数量：表格(0)个
参考文献：
基金项目：
- 文件大小:
- 669.94 KB
- 下载次数:
- 60
-
高速下载
|
|
