admin 发表于 2024-12-14 12:24

基于并联倾斜流道液冷板的锂电池组大倍率放电液冷散热研究


文档名:基于并联倾斜流道液冷板的锂电池组大倍率放电液冷散热研究
摘要:以方形磷酸铁锂电池组为研究对象,在传统的并联流道液冷板结构基础上进行优化设计,提出了并联-倾斜流道液冷板,对两种液冷板下6C大倍率放电的电池组散热性能进行对比.随后,对并联-倾斜流道液冷板开展单因素分析,研究在不同冷却液质量流量和液冷板结构参数(流道宽度、入口宽度和流道倾斜角度)下对电池组散热性能的影响.最后,设计正交实验对获得的仿真结果进行极差分析,结果表明并联-倾斜流道液冷板最优的结构参数组合是流道宽度12mm,入口流道宽度15mm,流道角度70°,质量流量30g/s.在相同的30g/s质量流量下,最优结构参数组合下电池组的最大温度、最大温差和液冷板的压降相比并联流道液冷板结构分别下降了0.45%、2.96%和29.08%.

Abstract:ThisstudyfocusedonaprismaticLiFeO4lithium-ionbatterypackandproposedanopti-mizeddesignoftheparallel-tiltedchannelliquidcoolingplateinsteadofthetraditionalparallelchan-nelliquidcoolingplate.A6Cdischargerateliquidcoolingsimulationwasconductedtocomparetheheatdissipationperformanceofthebatterypackunderthetwocoolingplates.Then,asingle-factoranalysiswasconductedontheparallel-tiltedchannelliquidcoolingplatetoinvestigatetheimpactofdifferentcoolingliquidmassflowratesandcoolingplatestructuralparameters(channelwidth,inletwidth,andchanneltiltangle)ontheheatdissipationperformanceofthebatterypack.Finally,anor-thogonalexperimentwasdesignedtoconductarangeanalysisonthesimulationresults.Theanalysisresultsshowthattheoptimalcombinationofstructuralparametersfortheparallel-tiltedchannelliq-uidcoolingplateisachannelwidthof12mm,aninletwidthof15mm,achannelangleof70°,andamassflowrateof30g/s.Atthesame30g/smassflowrate,themaximumtemperatureandmaximumtemperaturedifferenceofthebatterypackandthepressuredropoftheliquidcoolingplatearede-creasedby0.45%,2.96%and29.08%,respectively,fortheoptimalcombinationofstructuralparam-eterscomparedwiththeparallelchannelliquidcoolingplatestructure.

作者:樊旭孟超张鹏赵英汝Author:FANXuMENGChaoZHANGPengZHAOYingru
作者单位:厦门大学能源学院,福建厦门361102
刊名:电源技术 ISTICPKU
Journal:ChineseJournalofPowerSources
年,卷(期):2024, 48(4)
分类号:TM912.9
关键词:锂离子电池电池热管理液冷板结构设计正交实验
Keywords:lithium-ionbatterybatterythermalmanagementliquidcoolingplatestructuraldesignorthogonalexperiment
机标分类号:U469.72TM912TB61
在线出版日期:2024年6月11日
基金项目:国家重点研发计划,国家自然科学基金基于并联-倾斜流道液冷板的锂电池组大倍率放电液冷散热研究[
期刊论文]电源技术--2024, 48(4)樊旭孟超张鹏赵英汝以方形磷酸铁锂电池组为研究对象,在传统的并联流道液冷板结构基础上进行优化设计,提出了并联-倾斜流道液冷板,对两种液冷板下6C大倍率放电的电池组散热性能进行对比.随后,对并联-倾斜流道液冷板开展单因素分析,研究在不...参考文献和引证文献
参考文献
引证文献
本文读者也读过
相似文献
相关博文

        基于并联-倾斜流道液冷板的锂电池组大倍率放电液冷散热研究Liquid cooling heat dissipation study of Li-ion battery pack with high discharge rate based on parallel-tilt flow channel liquid cooling plate

基于并联-倾斜流道液冷板的锂电池组大倍率放电液冷散热研究.pdf
页: [1]
查看完整版本: 基于并联倾斜流道液冷板的锂电池组大倍率放电液冷散热研究